Autotube dispenser Barrel filling Cans & pails dispenser Caulking dispenser DA35 Autocan extruder system DB815 dispenser DD305 dispenser Dispensing pens Dispensing stands DK118 digital dispenser DSP501A dispenser DSP501A-4 dispenser DSP501A-TILL dispenser Flow-seal pens & bottles JB1113 dispenser PP300-A dispenser PPD-119 dispenser PPD-120 dispenser PPD-130 Peristaltic dispenser Reservoir tanks SMD602A-CE dispenser Tube-gun dispenser Vacuum pick-up systems VS215A-II-CE dispenser Wands - finger switches - gravity fed dispenser		Cans & pails dispenser
		How to dispense high viscosity materials from a pre-filled can or pail? It’s easy with the autocan system. No need to transfer material from one can to another container. Simply remove the top of the can and place under the extruder pump. Lower the extruder and follower-plate into the can. All the material beneath the follower-plate will be dispensed with minimum waste. The liquid is extruder-fed to a 790HPNM high-pressure valve seated within a pistol grip for comfort. The valve is operated by the DSP501A dispenser and activated by a trigger switch in the pistol grip. The system can deliver manual or accurately timed deposits, preventing drip or post extrusion.
		Features Eliminates waste Avoids material contamination No need to transfer material Easy to operate Specifications Pail size: 5 gallon - for specification and ratios contact factory Can sizes: 1quart – 1kg and 1 gallon/3kg Ratio: 8.5:1 Max. fluid pressure: 850 psi (59 bar) Air input: 25 – 100 psi (1.8 – 7.0 bar) Max. viscosity: 600,000 cps Down-stroke volume: 0.17oz (5.0cc) Max flow: 32 oz/min 940 cc/min (250,000 cps) Operating temperature: 140º F (60º C) Models FK1001 autocan extruder 1kg & 1qt extruder pump FK1002 autocan extruder 3kg & 1 gallon extruder pump 231-111 autocan extruder 5 gallon 15kg extruder pump DSP501A dispenser 110V DSPE501A dispenser 220V CE 790HPNM high-pressure valve Parts for autocan 560566B braided hose 6ft (1.83 meters) 560566B-8 braided hose 8ft (2.44 meters) 560601 gun handle (pistol grip) 560599 trigger switch assembly 560565 gun handle w/switch 560092A dispenser manual pail pump Trying to extract material from large pails can be a daunting project. The pail pump is a simple solution. Suitable only for 5-gallon straight-walled pails containing fluids, such as grease, paste, etc. The hand lever pumps the fluid to bottom-fill 2.5, 6, 8 or 12oz cartridges together with luer lock barrels from 3cc up to 55cc.   An internal follower-plate ensures that most material is used. Models 560092A pail pump extruder