Autotube dispenser Barrel filling Cans & pails dispenser Caulking dispenser DA35 Autocan extruder system DB815 dispenser DD305 dispenser Dispensing pens Dispensing stands DK118 digital dispenser DSP501A dispenser DSP501A-4 dispenser DSP501A-TILL dispenser Flow-seal pens & bottles JB1113 dispenser PP300-A dispenser PPD-119 dispenser PPD-120 dispenser PPD-130 Peristaltic dispenser Reservoir tanks SMD602A-CE dispenser Tube-gun dispenser Vacuum pick-up systems VS215A-II-CE dispenser Wands - finger switches - gravity fed dispenser		DA35 Autocan extruder system
		DA35 automatic ram assisted extrusion system The DA35 extrudes high viscosity material under pressure directly from a pre-filled can. Suitable for automatic and semi-automatic controlled dispensing applications which require a constant supply of air-free material. By using the DA35, air bubbles and material voids that are caused by handling or decanting viscose material are prevented. The can is prepared by cutting off its top, the extruder pump body is lifted and the can placed in position. The extruder pump body is fitted with a wiper-plate that seals and follows the material as the level drops to wipe the sides of the can clean limiting waste. The fluid is pressure fed by reinforced hoses to a valve, which is either mounted to a robot or operator held with a gun handle. The valve is actuated by a valve controller.
		DA35 features Material delivered air-free Wipe clean action Air rams to assist pumping of materials Wiper plate change for 1Kg (1qt) and 3Kg (1Gallon) cans Adjustable pressure Low noise air pump Electrical sensing Simple load mechanism also provides easy cleaning Teflon, Viton and PEEK seals for wetted parts Avoids waste No need to transfer material Easy hook up for automatic systems Accessories DSP501A dispenser 110V DSPE501A dispenser 220V CE VC-1195A valve controller 4-way 110V VCE-1195A valve controller 4-way 220V CE 790HPNM high pressure valve with suck-back 790HPSSNM high pressure valve SS with suck-back 562037 braided hose 8ft (2.44 meters) I.D. 8mm 560565 gun handle (pistol grip) w/switch Model DA35-110 autocan pump 110V DA35-220 autocan pump 220V CE DA35-1Kg wiper plate for 1Kg (1qt) can DA35-3Kg wiper plate for 3Kg (1Gallon) can Specification   Size base: 8.46” x 17.32” (215 x 440mm) Height adjustment: 21.65” min - 28.35” max (550 min - 720mm max) Weight: 28lbs (12.73kg) Power input for pump sensing: DA35-110 110V 50-60Hz. DA35-220 220V 50-60Hz Air input pressure: 243-700 kPa, 2.4 - 7.0 bar (35 - 100 psi) Maximum output pressure: 6.0 Mpa, 60 bar (850 psi) Fluid viscosity range: 10,000 - 600,000 cps Volume per stroke (dispenses on down stroke only): 5.0cc (0.17 oz.) Recommended pump speed for continuous operation: 40cpm Maximum recommended pump speed: 60cpm Stroke length: 3/4” (19mm) Max.operating temperature: 50ºC Air inlet size: 1/4 npt (f) Fluid outlet size: 1/4 npt (f) Wetted parts: 304 and 17-4 pH Stainless Steel, Teflon, Viton, PEEK Sound pressure level @ 100 psi: 64.12 dB (A) @ 40cpm Sound power level @ 100 psi: 70.84 dB(A) @ 40cpm