USAGermanyFranceSpainBrazilPortugalHungaryPolandDenmarkItaly
Autotube dispenser
Barrel filling
Cans & pails dispenser
Caulking dispenser
DA35 Autocan extruder system
DB815 dispenser
DD305 dispenser
Dispensing pens
Dispensing stands
DK118 digital dispenser
DSP501A dispenser
DSP501A-4 dispenser
DSP501A-TILL dispenser
Flow-seal pens & bottles
JB1113 dispenser
PPD-119 dispenser
PPD-120 dispenser
PPD-130 Peristaltic dispenser
Reservoir tanks
SMD602A-CE dispenser
Tube-gun dispenser
Vacuum pick-up systems
VS215A-II-CE dispenser
Wands - finger switches - gravity fed dispenser
PP300-A dispenser   clear view pressure chamber
A see-through pressure chamber for dispensing low viscosity liquids directly from bottles and up to 1lb jars. Regulated air pressure forces the liquid in the bottle up through a disposable tube to a connector, which can be interfaced to a valve or dispensing pen. The PP300-A is available in acrylic or glass for control of hazardous materials, such as solvents and cyanoacrylates.
PP300-A - 710PTNM - DSP501A pinch tube valve system
A combination of a 710PTNM pinch-tube valve mounted to the PP300-A and controlled via a DSP501A dispenser can accurately and safely apply micro shots of low viscosity liquids. All parts in contact with the material are disposable.


PP300-A – 700PTPCW manual pinch-tube pen system
The 700PTPCW dispensing pen when used with the PP300-A provides flexibility in applying continuous lines or microdots. An on/off lever controls the amount of material delivered.

Features
All material contact parts disposable
Material visible without opening chamber
Suitable for most low viscosity liquids

Models
PP300-A pressure chamber acrylic
PP300-GL-A pressure chamber glass (cyanoacrylates)
710PTNM pinch tube valve
560605 clamp for pinch tube valve
560606 support rod for pinch tube valve
DSP501A dispenser 110V
DSPE501A dispenser 220V CE
700PTPCW pinch tube pen

PP300-A specifications
Size: 6.00" x 6.00" x 11.00"
(15.24 x 15.24 x 27.94cm)
Air input: To regulator 70 to100 psi
(5 to 7 bar)
Air output: From regulator max 30 psi (2 bar)
Weight: Acrylic 8.5 Ibs 3.86 kg Glass 9.25 Ibs 4.20kg
Disposables: Lines and fittings are polyethylene




PP300-A parts (included)
560607 dispense tube 0.070"ID
560608* dispense tube 0.100"ID
560609 luer lock fitting 0.070"ID
560610* luer lock fitting 0.100"ID
560611 gage 0-30 psi
560612 knob assembly
560612B bushing
560613 clamp for tube
560614 reducer nipple 1/4" – 1/8" MPT
560615V O-ring (viton)
560616 relief valve
560618 reservoir glass (PP300-GL-A)
560619 reservoir acrylic (PP300-A)
560620 dip tube
560571 regulator 0-25 psi
560792 flat seal
580108 quick connect 1/4" MPT
*included upon request