Autotube dispenser Barrel filling Cans & pails dispenser Caulking dispenser DA35 Autocan extruder system DB815 dispenser DD305 dispenser Dispensing pens Dispensing stands DK118 digital dispenser DSP501A dispenser DSP501A-4 dispenser DSP501A-TILL dispenser Flow-seal pens & bottles JB1113 dispenser PP300-A dispenser PPD-119 dispenser PPD-120 dispenser PPD-130 Peristaltic dispenser Reservoir tanks SMD602A-CE dispenser Tube-gun dispenser Vacuum pick-up systems VS215A-II-CE dispenser Wands - finger switches - gravity fed dispenser		PPD-130 Peristaltic dispenser
		PPD-130 peristaltic pump dispensing Peristaltic pump dispensers transfer low viscosity liquids by pressure displacement applied to a turning rotor against a tube carr ying material. Usuallly these pumps are chosen because the liquids are hazardous or difficult to work with and it is advisable to limit operator contact. Another reason is that peristaltic pumps are air free. The model PPD-130 offers excellent features for air-free dispensing of materials such as cyanoacrylates, solvents, alkalines and acids. Dispense outputs can be timed from 0.01 - 99.99 seconds with flow speeds from 0.01 - 6ml/min using Teflon tubing and from 0.1 - 20ml/min using silicone tubing. The pump is bi-directional allowing snuff-back after discharge to prevent dripping of the fluid.
		PPD-130 features Air-free dispensing Forward and reverse motion Instant reverse for snuff-back cuts off liquid flow Adjustable interval before reverse direction Simple load mechanism also provides easy cleaning Teflon and silicone tube options Continuous or timer modes Large segment digital LED display Output signal to indicate end of dispense cycle Clean room compatible Operation Suitable for small shots and continuous operation Adjustable rotor speed in volume 0 - 10 Self priming from bottle or jar For smaller discharges at lower flow rates, Teflon tubing is used For larger discharges at higher flow rates silicone tubing is used System operated by finger switch on holder or remotely from I/O connector at rear of unit Timer display counts down for discharge Accessories (included)   Part #: Qty: Description: 562030-T 1 standard rotor for standard tubes 560989-B 1 nozzle holder (with switch) 561010-B 1 nozzle 1.5mm diameter 561011-B 1 nozzle 1.9mm diameter 561012-B 1 nozzle 2.4mm diameter 561013-B 1 nozzle 2.9mm diameter 560984A 1 hose 1 meter (3.28ft) 1.0 x 1.6mm 560985A 1 hose 1 meter (3.28ft) 1.4 x 2.0mm 560995A 1 hose 1 meter (3.28ft) 1.9 x 2.5mm 560996A 1 hose 1 meter (3.28ft) 2.4 x 3.0mm 562031 1 remote connector 562032 1 foot pedal (optional not included) Specifications Size: 7.18” x 3.20” x 6.73” (182.4 x 81.2 x 171mm) Weight: 6.6lbs (3kg) Input Voltage: 110V & 220V models 50/60 Hz Dispense time: 0.01 - 99.99 secounds Internal Voltage: 5V dc Cycle initiation: continuous & timed Rotor Speed: up to 120 rpm (max.) Flow speed: 0.01 - 6ml/min. (Teflon tube) 0.1 - 20ml/min (silicone tube) Dispense pressure: over 1.5Kg/cm2 Direction of pump: both direction (Forward / Reverse) Snuff-back: programmable by reverse rotation Digital display: time count down I/O: connection for remote operation Models (110 - 230 Volt) PPD-130-110 Peristaltic pump 110Volts 50/60 Hz PPD-130-220 Peristaltic pump 220Volts 50/60 Hz CE Item: Function: 1 Power switch LED lamp signals that the switch is on 2 RC mode remote control mode when operating the LED pulses 3 Timer mode time range - up to 99 sec 4 Cont. mode continuous operation 5 Speed adjustment dial adjusts the deposit size (0 - 10 volume) 6 Vacuum adjustment dial fluid cut off after the dispense operation 7 Vacuum interval timer adjustable within 0 - 3 sec 8 Manual input jack finger / foot s/w plug 9 Time set button to set fluid outlets 0.01 - 99.99 sec 10 Timer display LED counts down 11 Ccw/cw fix s/w ccw: Counterclockwise 12 cw: clockwise 13 Guide lock to lock a tube guide 14 Tube guide to support a tube installed in a rotor 15 Rotor head extracts fluid from a tube 16 Tube holder holds the tube at both ends supported by the rotor PPD-130 tubing, nozzles and optional pump heads   Pump Head: Clear tubing Black tubing I.D. x O.D. Suitable nozzle type part #: part #: milimeters: part #: 562030-T: 560984A 560984BA 1.0 x 1.6 561010-B nozzle 1.5mm 560985A 560985BA 1.4 x 2.0 561011-B nozzle 1.9mm 560995A 560995BA 1.9 x 2.5 561012-B nozzle 2.4mm 560996A 560996BA 2.4 x 3.0 561013-B nozzle 2.9mm Optional Pump heads: 562030-M: 560997A 560997BA 0.25 x 0.75 561007-B nozzle 0.7mm 562030-S: 560998A 560998BA 0.50 x 1.00 561008-B nozzle 0.9mm 560999A 560999BA 0.60 x 1.00 561009-B nozzle 1.0mm 562030-G: 562033 0.50 x 2.50 561012-B nozzle 2.4mm 562034 3.00 x 5.00 562035 8.00 x 10.00