I&J Fisnar Inc. - Dispensers

PPD-130 Peristaltic dispenser

PPD-130 peristaltic pump dispensing

Peristaltic pump dispensers transfer low viscosity liquids by pressure displacement applied to a turning rotor against a tube carrying material. Usually these pumps are chosen because the liquids are hazardous or difficult to work with and it is advisable to limit operator contact. Another reason is that peristaltic pumps are air free.
The model PPD-130 offers excellent features for air-free dispensing of materials such as cyanoacrylates, solvents, alkalines and acids. Dispense outputs can be timed from 0.01 - 99.99 seconds with flow speeds from 0.01 - 6ml/min using Teflon tubing and from 0.1 - 20ml/min using silicone tubing. The pump is bi-directional allowing snuff-back after discharge to prevent dripping of the fluid.

PPD-130 features

Air-free dispensing

Forward and reverse motion

Instant reverse for snuff-back cuts off liquid flow

Adjustable interval before reverse direction

Simple load mechanism also provides easy cleaning

Teflon and silicone tube options

Continuous or timer modes

Large segment digital LED display

Output signal to indicate end of dispense cycle

Clean room compatible

Operation

Suitable for small shots and continuous operation

Adjustable rotor speed in volume 0 - 10

Self priming from bottle or jar

For smaller discharges at lower flow rates, Teflon tubing is used

For larger discharges at higher flow rates silicone tubing is used

System operated by finger switch on holder or remotely from I/O connector at rear of unit

Timer display counts down for discharge

Accessories (included)

Part #:	Qty:	Description:
562030-T	1	standard rotor for standard tubes
560989-B	1	nozzle holder (with switch)
561010-B	1	nozzle 1.5mm diameter
561011-B	1	nozzle 1.9mm diameter
561012-B	1	nozzle 2.4mm diameter
561013-B	1	nozzle 2.9mm diameter
560984A	1	hose 1 meter (3.28ft) 1.0 x 1.6mm
560985A	1	hose 1 meter (3.28ft) 1.4 x 2.0mm
560995A	1	hose 1 meter (3.28ft) 1.9 x 2.5mm
560996A	1	hose 1 meter (3.28ft) 2.4 x 3.0mm
562031	1	remote connector
562032	1	foot pedal (optional not included)

Specifications
Size:	7.18 x 3.20 x 6.73 (182.4 x 81.2 x 171mm)
Weight:	6.6lbs (3kg)
Input Voltage:	110V & 220V models 50/60 Hz
Dispense time:	0.01 - 99.99 secounds
Internal Voltage:	5V dc
Cycle initiation:	continuous & timed
Rotor Speed:	up to 120 rpm (max.)
Flow speed:	0.01 - 6ml/min. (Teflon tube)
	0.1 - 20ml/min (silicone tube)
Dispense pressure:	over 1.5Kg/cm2
Direction of pump:	both direction (Forward / Reverse)
Snuff-back:	programmable by reverse rotation
Digital display:	time count down
I/O:	connection for remote operation

Models (110 - 230 Volt)

PPD-130-110 Peristaltic pump 110Volts 50/60 Hz

PPD-130-220 Peristaltic pump 220Volts 50/60 Hz CE

	Item:	Function:
1	Power switch	LED lamp signals that the switch is on
2	RC mode	remote control mode when operating the LED pulses
3	Timer mode	time range - up to 99 sec
4	Cont. mode	continuous operation
5	Speed adjustment dial	adjusts the deposit size (0 - 10 volume)
6	Vacuum adjustment dial	fluid cut off after the dispense operation
7	Vacuum interval timer	adjustable within 0 - 3 sec
8	Manual input jack	finger / foot s/w plug
9	Time set button	to set fluid outlets 0.01 - 99.99 sec
10	Timer display	LED counts down
11	Ccw/cw fix s/w	ccw: Counterclockwise
12		cw: clockwise
13	Guide lock	to lock a tube guide
14	Tube guide	to support a tube installed in a rotor
15	Rotor head	extracts fluid from a tube
16	Tube holder	holds the tube at both ends supported by the rotor

PPD-130 tubing, nozzles and optional pump heads

Pump Head:	Clear tubing	Black tubing	I.D. x O.D.	Suitable nozzle type
	part #:	part #:	milimeters:	part #:
562030-T:	560984A	560984BA	1.0 x 1.6	561010-B nozzle 1.5mm
	560985A	560985BA	1.4 x 2.0	561011-B nozzle 1.9mm
	560995A	560995BA	1.9 x 2.5	561012-B nozzle 2.4mm
	560996A	560996BA	2.4 x 3.0	561013-B nozzle 2.9mm
Optional
Pump heads:
562030-M:	560997A	560997BA	0.25 x 0.75	561007-B nozzle 0.7mm
562030-S:	560998A	560998BA	0.50 x 1.00	561008-B nozzle 0.9mm
	560999A	560999BA	0.60 x 1.00	561009-B nozzle 1.0mm
562030-G:	562033		0.50 x 2.50	561012-B nozzle 2.4mm
	562034		3.00 x 5.00
	562035		8.00 x 10.00

design by Datatec