USAGermanyFranceSpainBrazilPortugalHungaryPolandDenmarkItalyMexico 
Flow-seal pens & bottles
 

 

Flow-seal environmental pens and bottles channel controlled amounts of no-clean flux, rma, solvents, lubricants, masking and water-based liquids. Flow-seal products prevent evaporation of material and conform to current regulations for controlling substances capable of evaporation hazard. A unique dispensing valve prevents flooding and spattering, releasing material in controlled amounts to the nib (tip).
 



Assembly
The pen or bottle is in two parts (cap and reservoir) and is easily assembled. The reservoir should be filled with material to within 0.75" (19mm) of the top; this air chamber allows for the valve cap to be pressed securely in position. Priming is achieved by depressing the nib while the pen is vertical.



 


Model
FV-0100* flow-seal pen clear
FV-0200* flow-seal pen esd safe,
aluminum
FV-0300* flow-seal bottle 2 oz clear
FV-0400* flow-seal bottle 2 oz esd safe,
aluminum
FV-0500* flow-seal bottle 4 oz clear
FV-0600 flow-seal pen jumbo 1.5 oz
 
Flow-seal products are
*supplied with nib 381-8425-AC
 
381-8425-AC nib acrylic chisel
381-8425-AB nib acrylic bullet
381-8425-AP nib acrylic point
381-8425-PC nib polyester chisel
381-600-PB nib polyester blunt
(for FV-0600 only)

copyright Fisnar 2006

design by Datatec   

home  |  profile  |  products  |  movies  |  principals  |  international  |  links  |  site map  |  contact us